Set Your Honda Civic Catalog
A down arrow

SSR GTV01 Wheels for Honda Civic

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
Honda Civic
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(18x8.5, 5x114.3, 40mm, Flat Black)
Universal
(18x9.0, 5x114.3, 35mm, Flat Black)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 Honda Civic Fitment Help
Help narrow down what is shown.
Select your specific car using the Garage.
Jump to the Garage
For your Honda Civic the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Extra Wheel Size Range Bolt Pattern Wheel Offset Range
1988 to 2000 (14x5.5) to (17x7.5) 4x100 +35mm to +45mm
2001 to 2005 All Except Si (14x5.5) to (17x7.5) 4x100 +35mm to +45mm
2002 to 2003 Si (15x6) to (17x7.5) 4x100 +35mm to +45mm
2004 to 2005 Si (16x6.5) to (18x8) 5x114.3 +35mm to +45mm
2006 to 2015 All Except Si (16x6.5) to (19x8.5) 5x114.3 +38mm to +48mm
2006 to 2015 Si (17x7) to (19x8.5) 5x114.3 +38mm to +48mm
2016 to 2021 All Except Si and Type R (16x7) to (19x8.5) 5x114.3 +35mm to +48mm
2017 to 2020 Si (18x8) to (20x9) 5x114.3 +40mm to +55mm
2017 to 2021 Type R (19x8.5) to (20x9.5) 5x120 +45mm to +60mm
2022 to 2024 All Except Si and Type R (16x7) to (19x8.5) 5x114.3 +35mm to +48mm
2022 to 2024 Si (18x8) to (20x9) 5x114.3 +40mm to +55mm
2023 to 2024 Type R (18x9) to (20x10) 5x120 +45mm to +60mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The GTV01 is the first of SSR's fine GTV series wheels. A more traditional 5 spoke design with a bit of SSR flare. The GTV series wheels use Flow Forming Technology to not only increase strength, but also lower it's weight. This slick yet strong 1 piece design, ensures no extra maintenance is required. Lightweight and strong, with bold looks, makes this wheel a eye catcher on your Honda Civic.

Key Features:
  • Available in Glare Silver or Flat Black finish.
  • Flow Forming Technology to increase strength and lowering weight.
  • Strong 1 piece design.
  • JWL and VIA certified.

SSR GTV01 Wheel Hardware Information:
  • Center Caps: Included.
  • Valve Stems: Included.
  • Lug Nuts: Accepts standard aftermarket lug nuts (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

Our Customers Love Us - See our Reviews
...Loading Reviews